Home » Products » Beinlich Pumps » VISCO.pump® progressive cavity pumps

Beinlich VISCO.pump® progressive cavity pumps

The space saving VISCO.pump® is designed for a continuous dispensing proportional to speed where high precision is a must.

The VISCO.pump® is based on the volumetric principle of an endless (infinite) piston whereas the core components rotor and stator form a perfectly sealed metering chamber. The eccentric movement of the rotor allows for a low-shear motion of the medium from one chamber to the next chamber without squeezing the media. Thus, the pump is also well suited for filled media.

The VISCO.pump® product series comprises three product variations as the feed and drum drainage pump VISCO.feed as well as the two-component-dosing pumps VISCO.pump2k® and VISCO.mini2k®. Almost no tools are needed for installation and disassembly. An improved and more effective ventilation and an easier cleaning are characteristic for this Beinlich pump series.

Additionally, Beinlich offers the control electronics VISCO.tronic® which is suitable for the PCB and electronic component manufacturing.

Application areas

  • Dosing of filling compounds, coating of electronic components, protective coating of printed circuit boards, application of epoxy resin adhesives, bead dispensing, sealing, underfillings, dosing and metering, filling

Advantages of the progressive cavity pump VISCO.pump®

  • High dosing accuracy, ± 1% volumetric
  • Continuous dosing proportional to speed
  • Valveless closed system
  • Handles abrasive media
  • Low pulsation and shear
  • Almost no tools are needed for installation and disassembly
  • Improved and more effective ventilation
  • Easy cleaning                                                                                                                                                                                          
EXTERNAL SIZE Nominal volume (cc/rev)  

operating

pressure *

(bar)

operating

pressure *

(bar)

speed

range

(rpm)

speed

range

(rpm)

viscosity

(mPa.s)

      Inlet discharge min max  
1

0,01/0,05/0,15

  6 10 1 150 1-1000 000
2

0,30/1,00/2,00

  8 20 1 400 1-1000 000
3

4,00

  8 20 1 400 1-1000 000
4 7,00/9,00/11,00   8 25 1 400 1-1000 000

 * depending on viscosity



Contact us

Fields marked with * are required.

SUSPRO s.r.o.

billing address only
Pražská 809
266 01 Beroun
ČO: 27207790
DIČ: CZ27207790

Contact us

tel: 311 513 393
suspro@suspro.cz

Main office

Hořelická 334/1 267 12, Loděnice u Berouna

Moravian office

Tř. Maršála Malinovského 884, 686 01, Uherské Hradiště